Security Menu; Diagnostics Menu - HP COMPAQ PRESARIO G42 Maintenance And Service Manual

Security menu

NOTE:
Select
Setup Password
Power-On Password
Password Options
DriveLock Passwords
System IDs
Disk Sanitizer

Diagnostics menu

Select
HDD Self-Test Options
Memory Check
102 Chapter 5 Setup Utility
Some of the menu items listed in this section may not be supported by your computer.
To do this
Enter, change, or delete a setup password.
Enter, change, or delete a power-on password.
●
Enable/disable stringent security.
●
Enable/disable the password requirement on computer
restart.
●
Enable/disable DriveLock on any computer hard drive.
●
Enter, change, or disable DriveLock on an optional
MultiBay hard drive.
NOTE: DriveLock settings are accessible only when you
enter Computer Setup by turning on (not restarting) the
computer.
Enter a user-defined computer asset tracking number and
ownership tag.
Run Disk Sanitizer to destroy all existing data on the primary
hard drive. The following options are available:
●
Fast: Runs the Disk Sanitizer erase cycle once.
●
Optimum: Runs the Disk Sanitizer erase cycle 3 times.
●
Custom: Allows you to select the desired number of Disk
Sanitizer erase cycles from a list.
CAUTION: If you run Disk Sanitizer, the data on the
primary hard drive is destroyed permanently.
To do this
Run a comprehensive self-test on any hard drive in the system
or on any optional MultiBay hard drive.
Run a comprehensive check on system memory.