Ip Debug Sendto - THOMSON TG576 v7 Reference Manual

ip Commands

ip debug sendto

Send UDP packets.
SYNTAX:
ip debug sendto
where:
addr
count
size
interval
listen
dffield
srcaddr
srcport
dstport
dstintf
E-DOC-CTC-20071119-0014 v1.0
addr = <ip-address>
[count = <number{1-1000000}]>
[size = <number{0-20000}]>
[interval = <number{1-1000000}]>
[listen = <{disabled|enabled}]>
[dffield = <{disabled|enabled}]>
[srcaddr = <ip-address]>
[srcport = <number{1-65535}]>
dstport = <number{1-65535}>
[dstintf = <{loop|Internet|LocalNetwork}]>
The destination IP address.
The number of datagrams to send.
The size of the datagram.
The interval in milliseconds between datagrams.
Don't send, just listen for incoming datagrams.
Enables setting of the don't fragment flag in the
IP headers of the ping packet(s).
The IP source address to use.
The UDP source port number to use.
The UDP destination port number to send to.
The IP interface name.
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
REQUIRED
OPTIONAL
431