grp rip ifconfig
Configure a RIP interface.
SYNTAX:
grp rip ifconfig
where:
intf
rip
rxversion
authmode
authstr
splithorizon
370
intf = <{LocalNetwork|Internet}>
[rip = <{disabled|enabled}]>
[rxversion = <{rip_unspec|rip_v1|rip_v2|
rip_v1-2}]>
[authmode = <{none|cleartext}]>
[authstr = <password]>
[splithorizon = <{disabled|enabled}]>
The name of the RIP interface to configure.
Enable/Disable the RIP status.
Set the RIP receive version.
Set the RIP authentication mode.
Set the RIP authentication password.
Enable/Disable the split horizon status.
grp Commands
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20071119-0014 v1.0