Ip Commands - THOMSON TG576 v7 Reference Manual

ip Commands

ip Commands
ip arpadd
ip arpdelete
ip arplist
ip auto flush
ip auto ifadd
ip auto ifattach
ip auto ifconfig
ip auto ifdelete
ip auto ifdetach
ip auto iflist
ip config
ip debug httpprobe
ip debug sendto
ip debug stats
ip debug traceconfig
ip flush
ip ifadd
ip ifattach
ip ifconfig
ip ifdelete
ip ifdetach
ip iflist
ip ifwait
E-DOC-CTC-20071119-0014 v1.0
Add an entry to the ARP cache of a
broadcast IP interface.
Delete an ARP entry.
Display the ARP cache.
Flushes autoIP interfaces.
Creates a new autoIP interface.
Select and assign a link-local address
to an autoIP interface.
Configures an autoIP interface.
Deletes an existing autoIP interface.
Release the link-local address for the
given autoIP interface.
Shows the autoIP interfaces.
Display/Modify global IP stack
configuration.
Send HTTP probe to measure the
round trip time taken to connect and
access
Send UDP packets.
Display statistics.
Display/Modify IP stack trace
configuration.
Flush all static IP parameters.
Dynamic info (e.g. from PPP links)
remains.
Create an IP interface.
Attach an IP interface.
Modify an IP interface configuration.
Delete an IP interface.
Detach an IP interface.
Display all IP interfaces.
Wait for a status change of an IP
interface.
see page 419
see page 420
see page 421
see page 422
see page 423
see page 424
see page 425
see page 426
see page 427
see page 428
see page 429
see page 430
see page 431
see page 432
see page 433
see page 434
see page 435
see page 436
see page 437
see page 438
see page 439
see page 440
see page 441
417