Ip Commands - THOMSON TG576 v7 Reference Manual

ip Commands

ip Commands
ip arpadd
ip arpdelete
ip arplist
ip auto flush
ip auto ifadd
ip auto ifattach
ip auto ifconfig
ip auto ifdelete
ip auto ifdetach
ip auto iflist
ip config
ip debug httpprobe
ip debug sendto
ip debug stats
ip debug traceconfig
ip flush
ip ifadd
ip ifattach
ip ifconfig
ip ifdelete
ip ifdetach
ip iflist
ip ifwait
E-DOC-CTC-20071119-0014 v2.0
Add an entry to the ARP cache of a
broadcast IP interface.
Delete an ARP entry.
Display the ARP cache.
Flushes autoIP interfaces.
Creates a new autoIP interface.
Select and assign a link-local address
to an autoIP interface.
Configures an autoIP interface.
Deletes an existing autoIP interface.
Release the link-local address for the
given autoIP interface.
Shows the autoIP interfaces.
Display/Modify global IP stack
configuration.
Send HTTP probe to measure the
round trip time taken to connect and
access
Send UDP packets.
Display statistics.
Display/Modify IP stack trace
configuration.
Flush all static IP parameters.
Dynamic info (e.g. from PPP links)
remains.
Create an IP interface.
Attach an IP interface.
Modify an IP interface configuration.
Delete an IP interface.
Detach an IP interface.
Display all IP interfaces.
Wait for a status change of an IP
interface.
see page 457
see page 458
see page 459
see page 460
see page 461
see page 462
see page 463
see page 464
see page 465
see page 466
see page 467
see page 468
see page 469
see page 470
see page 471
see page 472
see page 473
see page 474
see page 475
see page 476
see page 477
see page 478
see page 479
455