Clean The Cartridge Carrier Contacts - HP 1040 SERIES User Manual

Maintain the print cartridge
4. Reinstall the cartridge and close the cover and panel.
If you spend a long time cleaning the cartridge, the cartridge carrier may have moved
back to the original position. If so, press Access Cartridge again to move the carrier to
the install position.
5. Press Start/Enter.
6. Press 1 for new cartridge or 2 for the old one.

Clean the cartridge carrier contacts

Before cleaning these parts, there should be no scheduled job such as delayed fax, send
polling, or faxes received into memory.
CAUTION:
memory will be lost.
1. Press Access Cartridge.
2.
Open the control panel and cartridge compartment cover and remove the cartridge.
Replace the print cartridge
See
3.
Remove the print cartridge.
4.
Unplug the power cord from the electrical outlet of the rear of the machine.
WARNING!
5.
Clean the cartridge carrier contacts with clean and cotton swab.
6.
Plug in the power cord and reinstall the cartridge.
Care and maintenance
Once you have unplugged the power cord from the machine, all data in
Shock Hazard. Be sure to unplug the power cord before proceeding.
60
on page 56.