Set Up Sound Menu; Tools Menu; Set Up Tam Menu - HP 1040 SERIES User Manual

SET UP SOUND menu

Option
Silent Mode

TOOLS menu

Option
Clean Cartridge
Align Cartridge
View Ink Level
Adjust Scanner
Factory Default
Language
Dial Mode
Discard Size
Self Test

SET UP TAM menu

Option
Toll Saver
Call Monitor
ICM Record Time
Settings
You can turn off sounds the machine makes either manually or on a daily
schedule (for example, to turn off the sounds after work hours and overnight).
Manual: To turn off and on the sounds, use the Silent Mode button on the
control panel.
Daily: Enter a start and end time. Use the 1 and 2 keys to switch between
AM and PM.
Settings
Cleans the print cartridge to improve print quality.
Aligns the print cartridge to improve print quality.
Allows you to see the estimated level of ink remaining in the cartridge.
Use only if you have dropped the fax machine.
Returns all settings to factory defaults.
There are three languages you can use for display and reports: English,
Spanish, and French.
Set the dialing mode to the type of the exchange to which you are connected:
Tone or Pulse.
If you turn the Automatic Reduction option off, you can set the fax machine to
discard any excess image at the bottom of the page when receiving a
document as long as or longer than the paper loaded in your machine. If the
incoming fax is out of the margin you have set, it will be printed on two sheets
of paper.
The Discard Size can be 00 to 30 mm.
Prints a self test to allow you to troubleshoot problems.
Settings
Adds 2 rings to the rings to answer setting unless a message has been
received.
Allows you to screen calls.
Adjusts the amount of time a caller has to record a message.
Overview of menu options
HP Fax basics 15