Table of Contents
Advertisement
Installing drivers and software
Installing an operating system
The ZOTAC ZBOX nano XS does not ship with an operating system preinstalled. An
operating system must be installed before the ZOTAC ZBOX nano XS can be used.
The following operating systems are supported:
•
Windows 7
•
Windows 8
Follow the instructions below to install an operating system:
1.
Insert disk for operating system into the optical drive.
2.
Wait for the ZOTAC ZBOX nano XS to boot from the disk.
3.
Follow the onscreen directions to install the operating system.
4.
Install system drivers to gain full functionality of the ZOTAC ZBOX nano XS
hardware and features.
Note: For best compatibility, please only use the eSATA or USB 2.0 ports as the OS
installation source drive connection.
Installing system drivers
Before you can use the full features of the ZOTAC ZBOX nano XS, the system
drivers must be installed. The following types of operating systems are supported by
the ZOTAC ZBOX nano XS driver DVD:
• Windows 7
•
Windows 8
Follow the instructions below to install the system drivers:
1.
Insert the ZOTAC ZBOX nano XS driver DVD. If
autorun is enabled, the driver installation
main menu will show up automatically.
Note: If autorun is disabled, you can click the file
Launch.EXE to bring up the driver installation main
menu.
2.
The following drivers are available on the
DVD:
• AMD Chipset Driver
• Realtek HD Audio Driver
• Realtek Network Driver
• MassStorage Driver
• CIR Driver
• USB Charger (optional)
Note: If you want to use USB charger for iPhone/iPad, please install the driver
at X:\Utility\Software\Usb Charger\setup.exe (X: your driver disk letter).
ZOTAC ZBOX nano XS
21
Advertisement
Table of Contents
