Table of Contents
Advertisement
Installing drivers and software
Installing an operating system
The ZP-CI333 NANO does not ship with an operating system preinstalled. The user must
install the operating system before the ZP-CI333 NANO can be used. The following operating
systems are supported:
• Windows 10/ 11
• Windows 10 IoT ENT LTSC
• Ubuntu 20.04 LTS
Follow the instructions below to install an operating system:
1.
Attach external USB flash drive via USB 3.1 ports.
2.
Wait for the ZP-CI333 NANO to boot from the drive.
3.
Follow the onscreen directions to install the operating system.
4.
Install system drivers to gain full functionality of the ZP-CI333 NANO hardware and
features.
Installing system drivers
Before you can use the full features of the ZP-CI333 NANO, the system drivers must be
installed. The following types of operating systems are supported by the ZP-CI333 NANO USB
flash drive:
• Windows 10/ 11
• Windows 10 IoT ENT LTSC
• Ubuntu 20.04 LTS
Follow the instructions below to install the system
drivers:
1.
Insert the ZP-CI333 NANO USB flash drive.
If autorun is enabled, the driver installation
main menu will show up automatically.
If autorun is disabled, you may click the file
Launch.EXE to bring up the driver installation
main menu.
2.
The following drivers are available on the USB
flash drive:
22
Advertisement
Table of Contents
