Installing Drivers And Software; Installing An Operating System; Installing System Drivers - Zotac ZBOX C Series User Manual

ZOTAC ZBOX nano

Installing drivers and software

Installing an operating system

Depending on the ZOTAC ZBOX nano model, the system may not ship with an operating
system pre-installed. The user must install the operating system before the ZOTAC ZBOX nano
can be used. The following operating systems are supported:
• Windows 11 Ready
Follow the instructions below to install an operating system:
1. Attach the USB flash drive via USB 3.1 port.
2. Wait for the ZOTAC ZBOX nano to boot from the USB flash drive.
3. Follow the onscreen directions to install the operating system.
4. Install system drivers to gain full functionality of the ZOTAC ZBOX nano hardware and
features.

Installing system drivers

Before you can use the full features of the ZOTAC ZBOX nano, the system drivers must be
installed. The following types of operating systems are supported by the USB flash drive:
• Windows 11 Ready
Follow the instructions below to install the
system drivers:
1. Insert the USB flash drive. If autorun is
enabled, the driver installation main menu
will show up automatically. If autorun is
disabled, you may click the file
Launch.EXE to bring up the driver
installation main menu.
2. The following drivers are available on the
USB flash drive:
• Intel Chipset Driver
• Intel Graphics Driver
• Intel I219-Lan Driver
• Intel Killer Lan Driver
20