Setting Up The Zotac Zbox Nano Xs - Zotac ZBOX nano XS AD13 series User Manual

ZOTAC ZBOX nano XS

Setting up the ZOTAC ZBOX nano XS

Please connect the peripherals before using the ZOTAC ZBOX nano XS.
1
1. Turning on the system
Connect the supplied AC adapter to the DC IN jack on the system rear panel and
then press the power switch on the front panel to turn on the system.
2. Connecting to an HDMI display
Connect one end of an HDMI cable to the HDMI port on the system rear panel and
the other end to a HDMI-compatible display such as an HDTV or monitor.
3. Connecting USB3.0 device
Connect USB3.0 devices such as external hard drives, SSDs and flash drives to
the USB3.0 port.
4. Connecting to a home network
Connect one end of a network cable to the LAN port on the system rear panel and
the other end to a network hub, switch or router.
5. Connecting USB2.0 device
Connect USB2.0 devices like wired/wireless keyboards (varying with areas), mouse
devices and printers to the USB2.0 ports.
16
2
3
4
5