ZOTAC ZBOX nano XS
How to enable USB2.0 charge (for S3/S4 status)
1.
In Advanced menu, select Onboard Device Config and press <Enter>.
2.
Use the arrow keys to enter the item Rear USB2.0 Charge hotplug(Top/
Bottom) / Front USB2.0 Charge hotplug, and select Enabled.
3.
Press F10 to save the configuration and exit.
Note: Before charging via USB2.0 in S5 status, please make sure the Deep S5 (Deep
S5 in PowerManage menu) is disabled.
10