Remove The Full-Length Expansion Board - HP ProLiant DL380p Gen8 User Manual

Remove the fan.
3.
CAUTION:
Operating the server in this manner results in improper airflow and improper cooling that can
lead to thermal damage.
IMPORTANT:
information, refer to the fan locations table
To replace the component, reverse the removal procedure.

Remove the full-length expansion board

WARNING:
remove the power cord to remove power from the server. The front panel Power On/Standby
button does not completely shut off system power. Portions of the power supply and some internal
circuitry remain active until AC power is removed.
To remove the component:
Power down the server (on page 23).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Extend ("Extend the server from the
3.
Remove the access panel (on page 24).
4.
Disconnect any external cables that are connected to the expansion board.
5.
Disconnect any internal cables that are connected to the expansion board.
6.
Do not operate the server for long periods with the access panel open or removed.
For optimum cooling, install fans in all primary fan locations. For more
To reduce the risk of personal injury, electric shock, or damage to the equipment,
rack" on page 23) or remove the server from the rack.
("Hot-plug fans" on page 21).
Operations 28