Systems Insight Display Leds - HP ProLiant DL380p Gen8 User Manual

Systems Insight Display LEDs

The HP Systems Insight Display LEDs represent the system board layout. The display enables diagnosis with
the access panel installed.
Item Description
Power cap
1
NIC link/activity
2
AMP status
3
Over temp
4
All other LEDs
—
Status
Off = System is in standby, or no cap is set.
Solid green = Power cap applied
Off = No link to network. If the power is off,
view the rear panel RJ-45 LEDs for status
("Rear panel LEDs and buttons" on page
14).
Flashing green = Network link and activity
Solid green = Network link
Off = AMP modes disabled
Solid green = AMP mode enabled
Solid amber = Failover
Flashing amber = Invalid configuration
Off = Normal
Solid amber = High system temperature
detected
Off = Normal
Amber = Failure
For more information on the activation of
these LEDs, see "Systems Insight Display
LED combinations (on page 12)."
Component identification 11