Install the cache module.
7.
Connect the capacitor pack cable to the connector on the top of the cache module.
8.
Install the access panel (on page 25).
9.
Install the server into the rack
10.
Connect each power cord to the server.
11.
Connect each power cord to the power source.
12.
Power up the server (on page 23).
13.
Installing the flash-backed write cache capacitor pack
CAUTION:
pinout. Do not use the controller with cache modules designed for other controller models,
because the controller can malfunction and you can lose data. Also, do not transfer this cache
module to an unsupported controller model, because you can lose data.
("Installing the server into the
The cache module connector does not use the industry-standard DDR3 mini-DIMM
rack" on page 38).
Hardware options installation 59