HP ProLiant DL380p Gen8 User Manual page 71

WARNING: To reduce the risk of personal injury, electric shock, or damage to the equipment,
remove the power cord to remove power from the server. The front panel Power On/Standby
button does not completely shut off system power. Portions of the power supply and some internal
circuitry remain active until AC power is removed.
Power down the server (on page 23).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Remove any attached network cables.
3.
Extend the server from the rack (on page 23).
4.
Remove the access panel (on page 24).
5.
Loosen the thumbscrew.
6.
Remove the existing FlexibleLOM.
7.
Hardware options installation 71