Systems Insight Display LEDs
The Systems Insight Display LEDs represent the system board layout. The display enables diagnosis with
the access panel installed.
Item
Description
Power supplies
1
NIC link/activity
2
Over temp
3
AMP status
4
Power cap
5
All other LEDs
—
Status
Off = Normal
Solid amber = Power subsystem
degraded, power supply failure, or input
power lost.
Off = No link to network. If the power is off,
view the rear panel RJ-45 LEDs for status
("Rear panel
LEDs" on page 87).
Flashing green = Network link and activity
Solid green = Network link
Off = Normal
Solid amber = High system temperature
detected
Off = AMP modes disabled
Solid green = AMP mode enabled
Solid amber = Failover
Flashing amber = Invalid configuration
Off = System is in standby, or no cap is
set.
Solid green = Power cap applied
Off = Normal
Amber = Failure
For more information on the activation of
these LEDs, see "Systems Insight Display
LED combinations (on page 86)."
Component identification 85