Precautions - Icom ID-5100A Basic Manual

Dual band transceiver
Hide thumbs Also See for ID-5100A:
Table of Contents

Advertisement

PRECAUTIONS

R DANGER HIGH VOLTAGE! NEVER
tenna connector during transmission. This may result in an
electrical shock or burn.
R WARNING RF EXPOSURE!
Radio Frequency (RF) energy. Extreme caution should be ob-
served when operating this transceiver. If you have any ques-
tions regarding RF exposure and safety standards please
refer to the Federal Communications Commission Office of
Engineering and Technology's report on Evaluating Compli-
ance with FCC Guidelines for Human Radio Frequency Elec-
tromagnetic Fields (OET Bulletin 65).
R WARNING! NEVER
driving a vehicle. Safe driving requires your full attention—
anything less may result in an accident.
R WARNING! NEVER
earphone or other audio accessories at high volume levels.
Hearing experts advise against continuous high volume op-
eration. If you experience a ringing in your ears, reduce the
volume level or discontinue use.
R WARNING! NEVER
outlet. This may pose a fire hazard or result in an electric
shock.
touch an an-
This transceiver emits
operate the transceiver while
operate the transceiver with an
connect the transceiver to an AC
R WARNING! NEVER
power source of more than 16 V DC. This will damage the
transceiver.
R WARNING! NEVER
power source using reverse polarity. This will damage the
transceiver.
R WARNING! NEVER
the DC plug and fuse holder. If an incorrect connection is
made after cutting, the transceiver may be damaged.
R WARNING! NEVER
touch any internal part or connectors on the rear panel of the
transceiver. This may result in an electric shock or this could
cause a fire or damage the transceiver.
R WARNING! NEVER
with wet hands. This may result in an electric shock or may
damage the transceiver.
R WARNING!
Immediately turn the transceiver power
OFF and remove the power cable if it emits an abnormal
odor, sound or smoke. Contact your Icom dealer or distributor
for advice.
CAUTION: NEVER
expose the transceiver to rain, snow
or any liquids.
connect the transceiver to a
connect the transceiver to a
cut the DC power cable between
let metal, wire or other objects
operate or touch the transceiver
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
vi

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Id-5100e

Table of Contents