Icom ID-5100A Basic Manual page 59

Touch "Link to Reflector."
t
Touch "Direct Input."
y
Touch [+] or [–] one or more times to select the reflector
u
number. (Example: 010)
• Touch [] to cancel, and then return to the previous screen.
Touch [+] or [–] one or more times on the right-end box to
i
select the module letter. (Example: B)
Touch [SET].
o
• The transceiver returns to the DR screen.
• "Link to Reflector" and "REF010BL" are displayed in "TO."
!0 Hold down [PTT] to link to the reflector.
• The LED1 on the microphone lights red.
D-STAR OPERATION
Using the TX History
The TX History stores the up to 5 reflectors that your access
repeater linked before.
Example: Select the "REF002AL" in the TX History.
Touch [DR].
q
Check whether or not "TO" is selected.
w
• If "TO" is not selected, touch the "TO" field.
Touch the "TO" field.
e
• Opens the "TO SELECT" screen.
Touch "Reflector."
r
• Opens the "REFLECTOR" screen.
4
4
46