Chicago Electric 92455 Operating Instructions Manual page 13

3. Before the first use, remove the Fuel Tank Cap (33) and fill the Fuel Tank (30B)
with unleaded gasoline. Then, replace the Fuel Tank Cap. Thereafter, check the
Engine's Fuel Gauge (34) for the amount of unleaded gasoline in the Fuel Tank.
If necessary, refill the Fuel Tank with unleaded gasoline. (See Figure C.)
To Start The Engine:
Make sure the electrical powered tools/equipment that will be used is not
1.
plugged in to the Generator.
Turn the 115 volt AC Circuit Breaker (5) to its "ON" position. (See Figure D.)
2.
Turn on the Fuel Valve (40B). (See Figure E.)
3.
Close the Choke Lever (21A) to about 1/8" clearance. (See Figure E.)
4.
CIRCUIT bREAKER
(5)
FIGURE D
CLOSED
CHOKE LEVER
(21A)
FUEL VALVE
REV 03/06
For technical questions, please call 1-800-444-3353.
SKU 92455
ON
OFF
OPEN
OFF
ON
FIGURE E
Page 13