Engine Maintenance Schedule - Chicago Electric 92455 Operating Instructions Manual

Generator set 5.5 hp - recoil start - 2200w/2400w rated

Hide thumbs Also See for 92455:

Operating instructions manual (25 pages)

Table Of Contents

Table of Contents

abnormal noise or vibration occurs, have the problem corrected before further use.

Do not use damaged equipment.

Follow all maintenance procedures as outlined in the Engine Maintenance Sched-

ule below at the specified intervals. In addition, observe the following details:

before each use: check to make sure the Engine's oil level is adequate. If neces-

sary, fill the Engine's Crankcase until the oil level is even with the Oil Fill Hole.

before each use: with a soft brush, cloth, or vacuum, remove all debris from the

Generator and engine. Then, use a premium quality, lightweight machine oil to

lubricate all moving parts.

After the initial 20 hours of use and every 100 hours of use thereafter: drain

the old Engine oil and replace with approximately 3/4 (0.63) quart of a high quality

SAE 10W-30 grade engine oil.

Interval

8 hours or

(More frequent maintenance

daily, before

will be necessary in dusty or

severe conditions.)

Clean engine and

check bolts & nuts

Check and refill engine

oil

Change engine oil*

Clean spark plug (28A)

Clean and adjust spark

plug (28A) electrodes

Replace spark plug

(28A)

Clean air cleaner

element (19A)

Replace air cleaner

element (19A)

Clean/replace fuel

filter(s)^

Replace fuel lines and

filter(s)^

Remove carbon from

cylinder head (11A)^

Check and adjust valve

clearance^

Clean and adjust

carburetor^

Overhaul engine^

Storage: Before storing, drain all fuel out of the generator's gas tank. If this is not

followed, old fuel in the generator's fuel tank may clog the generator and prevent it

from starting until cleaned out.

For technical questions, please call 1-800-444-3353.

SKU 92455