Section 1 Overview
1.1 Names of Parts
■ Front Panel
● E5CSV
Tool insertion hole
Deviation
indicators
Mode
indicators
Mode Key
Lock Release Key
■ Meanings of Indicators and Display
● Temperature
display
● Output indicator
● Alarm indicators
● Mode indicators
● Deviation
indicators
1-2
Temperature display
Output indicator
Alarm indicators
Up Key
Tool
Down Key
insertion hole
キ
Displays the present temperature or the parameters for the set point,
etc.
Displays 0 and lights for approximately one second during startup.
OUT (control output):
(1) ALM1(Alarm 1):
Lights when the alarm 1 function is ON.
(2) ALM2 (Alarm 2):
(1) SP (SP mode):
when the SP is being displayed in the operation level.
(2) ALM (ALM mode):
when the alarm value 1 is being displayed in the operation level.
Flashes when alarm value 2 is being displayed.
▲ : Lights when the deviation between the PV and SP is greater than
1%
FS
(multi-input
thermometer) models: 0.25% FS).
■ : Lights when the deviation between the PV and SP is within ±1%
FS (multi-input (thermocouple/platinum resistance thermometer)
models: ±0.25% FS).
▼ : Lights when the deviation between the PV and SP is smaller than
−1%
FS
(multi-input
thermometer) models: −0.25% FS). Either of the deviation
indicators flashes during ST (self-tuning)/AT (auto-tuning)
operation.
* The temperature range within which the ■ deviation indicator
lights can be changed in the initial setting level (1).
● E5CS-U
Deviation
indicators
Mode
indicators
Mode Key
Down Key
Lights when the control output function is ON.
Lights when the alarm 2 function is ON.
Lights when SP mode is being used. Lights
Lights when ALM mode is being used. Lights
(thermocouple/platinum
(thermocouple/platinum
Temperature display
Output indicator
Alarm indicators
Up Key
Front door
opening/closing
groove
Front door
resistance
resistance