Access Installer Program From User Home Screen - Lennox icomfort Setup Manual

Access installer program from Home screen − Page 1 of 1
To access the installer program after the unit has been placed in opera-
tion and the user home screen is displayed, press the Lennox" logo and
hold for 5 seconds (see figure 35). The system will access the installer
screens.
Figure 35. Enter installation setup mode from home screen
506052−01 11/09
Figure 36, Qualified Lennox equipment installer warning" screen ap-
pears; press yes to proceed (no returns the home screen).
The following screens are intended for use by
qualified Lennox equipment installers only.
Figure 36. Qualified Lennox equipment installer warning
When you press yes, the thermostat's processor will search for commu-
nicating devices in the system. The next display will be a summary of all
alerts detected.
After initial installation, if an alert is present when you are making
changes to settings, no action on the alert is mandatory.
Page 22
WARNING
Do you want to proceed?
yes no