Reconfiguring A System - Lennox icomfort Setup Manual

Reconfiguring a system − Page 1 of 2
To begin reconfiguring a system, press the setup tab. Press confirm to continue system configuration; the screen will change
to the system discovery screen.
The Start system configuration" screen (figure 37) appears; press start
to proceed.
setup tests equipment HELP
tests
setup tests equipment HELP
configuring the system may affect some device settings.
press start button below only if you wish to setup a
confirm to continue, or press cancel
new system, or to re−setup an existing system
confirm cancel
start
back
Figure 38. Re−configure confirmation
Figure 37. Start system configuration
If this is the first attempt to configure a system, the screen will change to
SYSTEM DISCOVERY IN PROGRESS
the system discovery screen.
The Re−configure confirmation" screen (figure 38) will only appear on
attempts to RE−CONFIGURE the system. It is a reminder that system
configuration may affect some existing device settings and prompts to
confirm or cancel the configuration process (returns to figure 37). Figure 39. System discovery
Page 23
icomfortt Touch Screen 7−Day Programmable Thermostat