Lk6 Light Kit Installation (Optional) - Empire Comfort Systems DVCP32BP30N-1 Installation Instructions And Owner's Manual

LK6 LIGHT KIT INSTALLATION (OPTIONAL)

1. Remove the four screws securing the metal plate and gasket
to the top of the firebox and discard. See Figure 15.
2. Disconnect the two leads from the light assembly to the con-
trol assembly.
3. While wearing gloves, attach the light bulb to the light socket.
4. Feed the light kit wiring through the cut-out and down the right
side of the unit.
5. Secure the bezel, glass, gasket and light assembly to the
firebox with four screws. Note: The painted side of the glass
faces up. See Figure 16.
6. Reconnect the wires disconnected in step two and connect
the power source to the wall outlet.
Page 12
Figure 15
Figure 16
3
1
5
4
2
6
LIGHT KIT PARTS LIST
INDEX PART
NO. NO.
1 32792 ACCENT LIGHT ASSEMBLY
2 R9342
3 R11751
4 R11752
5 R10928
35W, B1 PIN 6.35mm BASE
6 R2737
DISCONNECT HERE TO INSTALL
LIGHT.
DESCRIPTION
BEZEL
GASKET
GLASS
LIGHT BULB
SCREWS-#10 x 1/2
32261-5-0414
QTY
1
1
1
1
1
4