Using The Show Version Command - Cisco 7401ASR Installation And Configuration Manual

Hide thumbs Also See for 7401ASR:
Table of Contents

Advertisement

Appendix B
PXF Information
Using show Commands

Using the show version Command

Use the show version command to display the configuration of the system hardware and the software
version.
The following example of the show version command provides information about a Cisco 7401ASR
router:
Router# show version
Cisco Internetwork Operating System Software
IOS (tm) 7400 Software (C7400-JS-M), Version 12.2
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Sat 19-May-01 11:31 by
Image text-base:0x60008960, data-base:0x617CA000
ROM:System Bootstrap, Version 12.2(1r)DD1, RELEASE SOFTWARE (fc1)
BOOTFLASH:7400 Software (C7400-KBOOT-M),
12.2(20010427:125)
router uptime is 17 hours, 2 minutes
System returned to ROM by reload at 01:09:49 UTC Sat Jan 1 2000
System image file is "tftp://000.000.000.000//tftpboot/biff/122_1_DX/c7400-
mz.V122_1_DX.5.19.01"
cisco 7401ASR (NSE) processor (revision A) with 245760K/16384K bytes of memory
Processor board ID 4294967295
R7000 CPU at 375Mhz, Implementation 39, Rev 3.3, 256KB L2, 2000KB L3 Cache
1 slot ASR midplane, Version 2.0
Last reset from power-on
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
PXF processor tmc is running.
8 Ethernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)
509K bytes of non-volatile configuration memory.
64256K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes).
8192K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x100
Cisco 7401ASR Installation and Configuration Guide
B-2
OL-5419-01 B0

Advertisement

Table of Contents
loading

Table of Contents