Removing The Nim-Ssd From The Router - Cisco 4451-X Hardware Installation Manual

Chapter 6 Installing and Upgrading Internal Modules and FRUs
Figure 6-12
2
1. Captive screws holding the NIM-SSD to the router.
Using a Phillips screwdriver, loosen the captive screws on either side as shown in
Step 2
Figure 6-13
Figure 6-13
1. Captive screws attaching the NIM-SSD carrier card to the router body.
Holding the two captive screws, slide the entire NIM-SSD unit out as shown in
Step 3
OL-27644-01

Removing the NIM-SSD from the Router

L
L
Removing the NIM-SSD Carrier Card from the Router
1
Hardware Installation Guide for the Cisco 4451-X Integrated Services Router
Overview of the SSD Carrier Card NIM (NIM-SSD)
11
Figure 6-12
1
Figure
1
and
6-13.
6-17