Cisco 4451-X Hardware Installation Manual page 32

Chapter 1 Overview of the Cisco 4451-X Integrated Services Router
Internal Slots
• Packet Voice Digital Signal Processor Modules, page 1-16
Memory, page 1-16
•
Compact Flash, page 1-15
•
Because of physical differences with the new slots, legacy network modules and legacy Service Modules
require an adapter for installation.
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
This equipment must be installed and maintained by service personnel as defined by AS/NZS 3260.
Warning
Incorrectly connecting this equipment to a general-purpose outlet could be hazardous. The
telecommunications lines must be disconnected 1) before unplugging the main power connector or 2)
while the housing is open, or both. Statement 1043
See the
document for general information and single- and double-wide slot numbering.
See the
describe how to install SMs in the router.
See the
information.
See the
describe how to install legacy interface cards in the router.
See the router product page at Cisco.com for a list of supported network modules and interface cards for
Note
Cisco ISR 4451-Xs.
OL-27644-01
Overview of Cisco Network Modules and Service Modules for Cisco Access Routers
Installing Cisco Network Modules in Cisco Access Routers
Overview of Cisco Interface Cards for Cisco Access Routers
Installing Cisco Interface Cards in Cisco Access Routers
Hardware Installation Guide for the Cisco 4451-X Integrated Services Router
Hardware Features
document for instructions that
for general interface card
document, for instructions that
1-14