Appendix; Cable And Port Specifications; Module Connectors; Connector - Cisco Nexus 7000 Series Hardware Installation And Reference Manual

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m

Cable and Port Specifications

This appendix specifies the cables and port connectors used with the Cisco Nexus 7000 Series devices.
This appendix includes the following sections:
•

Module Connectors

This section describes the types of module connectors used with the Cisco Nexus 7000 Series devices:
•
•
RJ-45 Connector
The RJ-45 connector connects Category 3, Category 5, Category 5e, Category 6, or Category 6A foil
twisted-pair or unshielded twisted-pair cable from the external network to the following module
interface connectors:
•
•
To comply with GR-1089 intrabuilding, lightning immunity requirements, you must use foil twisted-pair
Caution
(FTP) cable that is properly grounded at both ends.
OL-18634-01
Module Connectors, page B-1
RJ-45 Connector, page B-1
SFP+ Transceivers, page B-2
Supervisor modules
CONSOLE port
–
COM1/AUX port
–
MGMT ETH port
–
CMP MGMT ETH port
–
48-port 10/100/1000 Ethernet modules
10/100/1000 ports
–
A P P E N D I X
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
B
B-1