iR1200 Modem
appropriate, but does not return the NO DIALTONE
result code.
4 = The modem may return either the BUSY or NO
DIALTONE result code, if appropriate.
Restore User Defaults
This command causes the modem to reset all parameters and S-registers to their
user-defined default values. There are three sets of user defaults (or images).
The parameter selects between which image is being requested.
Command
Action
Atz <image>
Query
Range
Parameter
0 = Local user image 0
Values:
1 = Local user image 1
2 – Local user image 2
DCD Behavior
This parameter determines how the DCD line relates to the detection of
received line signals from the distant end.
Changing the parameter takes effect immediately in
!
both the command and online command states.
Command
Action
AT&c <setting>
Query
AT&v
72
Z
&C
nextel.com