iR1200 Modem
Values:
1 = Enabled command mode character echo.
Dial
This command instructs the DCE to originate a call. When the DCE receives
the dial string from the computer, all non-numeric characters in the Dial String
that are not recognized dial-modifiers are ignored. This allows the DTE to
request modem numbers containing unsupported dial modifiers, hyphens,
parenthesis, and other punctuation.
Command
Action
ATd <Dial String>
Query
Range
Parameter
Dial string contains a modem number to be dialed,
Values
translated into an array of ASCII characters between 0
(dial
and 9 inclusive
modifiers)
T = Allowed, but ignored by the modem.
:
P = Allowed, but ignored by the modem.
! = Hook Flash (1/2 second).
W = Wait for time specified in S7 for dial tone.
(blank) = Wait for time specified in S7 for one or more
rings followed by five seconds of silence before
continuing execution of dial string.
, = Pause for time specified in S8
; = After dialing return to command mode.
68
D
nextel.com