Configuring With At Commands; Configuring With At Commands; Modem Initialization; Restore Factory Defaults - Nextel iR1200 Administrator's Manual

Configuring With AT Commands

Modem Initialization

The iR1200 modem's factory default image 2 is configured to start up with
packet data. If you are using circuit switched data, we recommend that you
Step 1 – Backup image 2 (default) to image 1
AT Command
Command Syntax
Expected Return Code(s)
Step 2 – Change default call setting (packet data) to circuit switched
AT Command
Command Syntax
Expected Return Code(s)
Step 3 – Save new setting as default profile.
AT Command
Command Syntax
Expected Return Code(s)

Restore Factory Defaults

To ensure a clean configuration process, you should restore the current values
to their factory default values by applying the following.
AT Command
RFM-4002-5015 Rev 3
Modem Profiles and Settings
Save User Default profile 2 to
profile 1
AT&W1
OK
Change Call Setting Parameter
ATZ0
OK
Save User Default
Configuration
AT&W2
OK
Restore Factory-Default
57