IMPORTANT: These settings are stored on the modem's Random
Access Memory (RAM) and are lost when the modem is turned off
unless stored in the modem's non-volatile memory.
The iR1200 modem can store up to three profile or image. By default, image 2
is loaded when the modem is powered on. We recommend that you save this
setting to the first profile/image.
AT Command
Command Syntax
Expected Return Code(s)
GPS Default Parameters
The iR1200 GPS-Enabled modem will use the following NMEA default
parameters.
The factory default port characteristics are:
•
Baud rate = 4800 bps
•
Data bits = 8
•
Stop bits = 1
•
Parity = None
Note: These settings should not be changed unless absolutely
necessary.
RFM-4002-5015 Rev 3
Modem Profiles and Settings
Save User Default
Configuration
AT&W1
OK
63