Printing On Both Sides Of Paper; Printing A Reduced Or Enlarged Document; Fitting Your Document To A Selected Paper Size - Ricoh SP 3300 Series User Manual

Printing on Both Sides of Paper

You can print on both sides of a sheet of paper. Before printing, decide
how you want your document oriented.
The options are:
• Printer Setting, if you select this option, this feature is
determined by the setting you've made on the control panel of the
printer.
• None
• Long Edge, which is the conventional layout used in book
binding.
• Short Edge, which is the type often used with calendars.
2
3
3
2 5
5
▲
Long Edge
• Reverse Duplex Printing, allows you to select general print
order compare to duplex print order.
N : Do not print on both sides of labels, transparencies,
OTE
envelopes, or thick paper. Paper jamming and damage to the printer
may result.
1
To change the print settings from your software application,
access printer properties. "Printing a Document" on page 11.
2
From the Layout tab, select the paper orientation.
3
From the Double-sided Printing section, select the binding
option you want.
4
Click the Paper tab and select the paper source, size, and type.
5
Click OK and print the document.
2
3
5
2
3
5
▲
Short Edge
19
Advanced Printing
Printing a Reduced or Enlarged
Document
You can change the size of a page's content to appear larger or smaller
on the printed page.
1
To change the print settings from your software application,
access printer properties. See "Printing a Document" on
page 11.
2
From the Paper tab, select Reduce/Enlarge in the Printing
Type drop-down list.
3
Enter the scaling rate in the Percentage input box.
You can also click the
4
Select the paper source, size, and type in Paper Options.
5
Click OK and print the document.
Fitting Your Document to a Selected
Paper Size
This printer feature allows you to scale your print job to any selected
paper size regardless of the digital document size. This can be useful
A
when you want to check fine details on a small document.
1
To change the print settings from your software application,
access printer properties. See "Printing a Document" on
page 11.
2
From the Paper tab, select Fit to Page in the Printing Type
drop-down list.
3
Select the correct size from the Output size drop-down list.
4
Select the paper source, size, and type in Paper Options.
5
Click OK and print the document.
or button.