Finding More Information; Setting Up The Hardware - Ricoh SP 3300 Series User Manual

Finding more information

You can find information for setting up and using your printer from the
following resources, either printed or onscreen.
Quick Install Provides information on setting up your
Guide printer, therefore, be sure to follow the
instructions in the guide to get the printer
quick install guide
ready.
1 1 3 3
1 2 3
Item(s) with * mark may not be supplied depending on your model and country
4 5 6
4 4
2 2
1 2 3
5 5
4 5 6
6 6
Online User's Provides you with step-by-step instructions for
Guide using your printer's full features, and contains
information for maintaining your printer,
troubleshooting, and installing accessories.
This user's guide also contains a Software
Section providing you with information on how
to print documents with your printer on various
operating systems, and how to use the
supplied software utilities.
Note
You can access the user's guides in other
languages from the Manual folder on the
supplied CD-ROM.
Printer Driver Provides you with help information on printer
Help driver properties and instructions for setting up
the properties for printing. To access a printer
driver help screen, click Help from the printer
properties dialog box.

Setting up the hardware

This section shows the steps to set up the hardware which is explained
in the Quick Install Guide. Make sure you read Quick Install Guide and
complete following steps.
1 Select a stable location.
Select a level, stable place with adequate space for air circulation.
Allow extra space to open covers and trays.
The area should be well-ventilated and away from direct sunlight or
sources of heat, cold, and humidity. Do not set the machine close to
the edge of your desk or table.
Printing is suitable for altitudes under 1,000 m (3,281 ft). Refer to
the altitude setting to optimize your printing. See page 1.5 for more
information.
1.4
<Introduction>