Pc Connection - Toshiba 19DV615Y Owner's Manual

As PCs are sometimes supplied with a 'conventional' CRT monitor, you may need to adjust the display settings of your PC's
graphics card, otherwise the pictures may not appear correctly. Switch on your PC (still with your original monitor) - select "1360
x 768" for the screen resolution, and select 60 Hz for the on-screen refresh rate. Switch off your PC, then connect it to your TV
while both items are still switched off.
Monitor Display modes
MODE Resolution
VGA 640 x 480
SVGA 800 x 600
XGA 1024 x 768
WXGA 1280 x 720
WXGA 1280 x 768
WXGA 1360 x 768
(according to Graphic card)
Select PC input
(1) Switch on the TV.
(2) Switch on the computer.
(3) Select the PC input mode (see
page 13). (When you use HDMI
cable, select HDMI input mode.)
Notes:
• If there is no video signal from the
computer when the unit is in PC mode,
"No Signal" will appear on the TV
screen.
• Digital PC connection via HDMI input
is not supported.
If you try to connect your PC digitally,
the TV-operation might freeze. TV will
stop to respond properly on user
commands.
Countermeasure:
Switch-off your TV and disconnect
from the 220 ~ 240V power-supply.
Disconnect the digital PC connection.
Now you may retry operating your TV.
• If a digital PC connection does show a
picture, proper working is not
guaranteed. Digital PC connection is
not granted for this TV.
After connecting a PC to your TV, you can now configure the display and audio settings.
To configure the display settings
(1) Press MENU SETUP to display the Main Menu
screen.
/
(2) Press to select the "
press ENTER/CH LIST
(3) On the Picture menu you can adjust various picture
properties such as brightness, contrast, colour,
sharpness, tint, colour temperature and backlight.
(4) For a list of available menu options in the Picture menu,
see page 22.
V. Frequency
59.940 Hz
60.317 Hz
60.004 Hz
60.000 Hz
59.870 Hz
60.015 Hz
Use a PC-VGA cable (not supplied) to connect the TV to your PC.
TV (Back side view)
To HDMI/PC
AUDIO input
All illustrated cables are not supplied
Example: To adjust the contrast.
1
During PC mode press MENU SETUP
2 /
Press to select "Picture", then press ENTER/CH LIST
/
Press to select "Picture Setting", then press ENTER/CH LIST
Select CONTRAST, then press ENTER/CH LIST
/
Press to adjust the contrast.
3
Press EXIT/CANCEL
To configure the audio settings
(1) Press MENU SETUP
Picture" menu, then
(2) Press
.
(3) On the Sound menu you can adjust the NICAM stereo
(4) For a list of available menu options in the Sound menu,

PC connection

H. Frequency
31.469 kHz
37.879 kHz
48.363 kHz
45.000 kHz
47.776 kHz
47.712 kHz
VGA cable
Audio cable
to display the Main Menu screen.
to return to the normal screen.
to display the Main Menu
screen.
/
to select the "
press ENTER/CH LIST .
reception, and the bass, treble, balance and sound
effects.
see page 22.
Pixel Clock Frequency
25.175 MHz
40.000 MHz
65.000 MHz
74.250 MHz
79.500 MHz
85.500 MHz
PC
.
.
.
Sound" menu, then
53