Basic Operation - Toshiba 19DV615Y Owner's Manual

Channel selection
Use the 0-9 numbered buttons.
Example:
• No. 2: Press 0 and within 2 seconds, press 2.
• No. 29: Press 2 and within 2 seconds, press 9.
(1) Press CH
(2) Press CH LIST
(3) Press
(4) Press EXIT/CANCEL
Toggle between the list of TV, Radio and Data services
Notes:
(1) Press TV/RADIO
• If the built-in tuner does
not receive anything (e.g.
if no antenna is
(2) If you press ENTER/CH LIST
connected) during TV-
operation, then the TV-
unit will change to standby
after approx. 15 minutes.
• This unit only support
NorDig Version 2.0 data
service.
• Press TV/RADIO to
QuickView
switch to TV, Radio and
Press CH RTN
Data three service
categories according to
NorDig 2.0 specifications. Volume adjustment
Press VOL +
volume level. The indicator will disappear after 4 seconds of inactivity.
Mute
Press MUTE
will appear on-screen. Press MUTE
/
to select a channel. This takes approx. 2 seconds. If the auto search
only stored 5 stations, only these 5 will appear. Skipped channels will not appear (see
page 15).
The Channel List shows a list of all receivable programmes. They are located in channels
1 to 99 for ATV mode and 1 to 999 for DTV mode.
to display the Channel List.
Analog Channel List
/
to select the desired channel, then press ENTER/CH LIST
the selected channel.
to exit.
to switch between the TV, Radio and Data mode.
display the list of Radio services.
If you wish to view the list of Data services without exiting the current menu, press
once.
TV/RADIO
If you wish to view the list of TV services without exiting the current menu, press
twice.
TV/RADIO
to go back to the last selected channel.
– to adjust the volume level. The volume level indicator shows the current
/
to switch off the sound. The TV/DVD's sound will be turned off and "Mute"

Basic operation

DTV Channel List
when you are in Radio mode the channel list menu will
again or VOL + – to turn the sound on.
/
to display
17