Toshiba 19DV615Y Owner's Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. TV DVD Combo
  5. 19DV615Y
  6. Owner's manual

Toshiba 19DV615Y Owner's Manual

Lcd tv/dvd combination
Hide thumbs
Table of Contents

Advertisement

Quick Links

LCD TV/DVD COMBINATION
19DV615Y
22DV615Y
26DV615Y
OWNER'S MANUAL
©2009 Toshiba Corporation
Before operating the unit, please read this manual thoroughly.
Owner's Record
The model number and serial number
are on the back of your TV/DVD.
Record these numbers in the spaces
below. Refer to these numbers whenever
you communicate with your Toshiba
dealer about this TV/DVD.
Model number: _________________
Serial number: _________________

Advertisement

Table of Contents
loading

Related Manuals for Toshiba 19DV615Y

Summary of Contents for Toshiba 19DV615Y

  • Page 1 The model number and serial number are on the back of your TV/DVD. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this TV/DVD. ©2009 Toshiba Corporation Model number: _________________ Before operating the unit, please read this manual thoroughly.

  • Page 2: Precautions

    Precautions CAUTION: THIS UNIT IS A CLASS 1 LASER PRODUCT. HOWEVER THIS UNIT USES A VISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE PLAYER CORRECTLY AS INSTRUCTED. THE FOLLOWING CAUTION LABEL IS LOCATED ON THE REAR PANEL OF THE UNIT. CLASS 1 LASER PRODUCT WHEN THIS UNIT IS PLUGGED INTO THE WALL OUTLET, DO NOT PLACE YOUR EYES CLOSE TO THE OPENINGS TO...

  • Page 3: Table Of Contents

    Contents Precautions ....................................2 Important safety information ................................ 4 Location of controls ..................................6 Remote control .................................... 7 I/O connections .................................... 9 Auto setup ....................................10 Quick guide for menu operation ..............................12 Selecting the video input source/On-screen language selection ....................13 Automatic station presetting with the built-in Tuner ........................

  • Page 4: Important Safety Information

    Important safety information This unit has been produced according to all current safety regulations. The following safety tips should safeguard users against careless use and the dangers connected with such use. • Although this appliance has been carefully manufactured and rigorously checked prior to leaving the factory, as with all electrical appliances it is possible for problems to develop.
  • Page 5 Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not limited to the following, loss of profit, interruption of business, the loss of recorded data whether caused during normal operation or misuse of the product.

  • Page 6: Location Of Controls

    Hold the base of the TV while adjusting the angle. Applicable to the following models only: 19DV615Y and 22DV615Y Description of indicators and controls Remote sensor POWER indicator: The POWER indicator indicator lights up red in standby mode and green when TV is powered Loudspeakers (EJECT) button: Ejects a disc.

  • Page 7: Remote Control

    Remote control Function Page Eject a disc Select to operate TV/DVD 12, 31 Switches between the analog TV and the digital TV Enter standby mode or turn on the power Select channel Select Teletext page Enter password 25, 51 Display source information and Teletext time Turn the sound on/off Toggle between the TV, Radio, and Data mode Select an input source...
  • Page 8 Remote control (continued) Install the batteries Use batteries type UM4/R03 (AAA-Size). Notes: • Exhausted batteries can leak corrosive electrolyte, which may cause damage to the remote control — therefore remove exhausted batteries immediately. • Do not use old or weak batteries. The remote control may not work properly with a weak voltage from such batteries. Replace exhausted batteries with new ones.

  • Page 9: I/O Connections

    If you have problems with reception, consult a TV antenna installer. Illustration of 26DV615Y Illustration of 19DV615Y/22DV615Y (A) AC input: Connect the supplied power cable to an AC 220 ~ 240V/50Hz mains power supply only - do not attempt to connect it to any other type of supply.

  • Page 10: Auto Setup

    Auto setup Your unit has an Automatic Preparation: installation routine which makes installation in your Press on the unit or on the remote unit easy. When you turn on control. the unit for the first time, the The Auto Installation menu will appear. Automatic installation routine is activated.
  • Page 11 Auto setup (continued) Press to select “Auto Tuning”, then press ENTER/CH LIST Press ENTER/CH LIST again to begin the programme search. Your TV will now scan or auto-tune for all available channels. Your TV will tune analog channels first, then tune the digital channels.

  • Page 12: Quick Guide For Menu Operation

    Quick guide for menu operation Make sure the aerial Quick guide for menu operation connection and power supply Example: When the DIGITAL MENU is pressed in ATV mode, it will automatically switch to are connected as per the description on page 9. DTV mode.

  • Page 13: Selecting The Video Input Source/On-Screen Language Selection

    Selecting the video input source/On-screen language selection Selecting the video input source Press INPUT to view a signal from another device connected to your TV, such as a VCR or DVD player. You can select each input source depending on the input jack used to connect your devices. Press to select a video input source, then press ENTER/CH LIST...

  • Page 14: Automatic Station Presetting With The Built-In Tuner

    Automatic station presetting with the built-in Tuner Automatic station presetting with the built-in Tuner Perform this feature to search for and store new analog and digital TV programmes after the Automatic installation (see page 10). Preparation: Make sure your antenna is connected to the aerial input (see page 9). Select ATV or DTV (see page 12), then press MENU SETUP or DIGITAL MENU Press...

  • Page 15: Changing The Order Of Stored Channels

    Changing the order of stored channels Changing the order of stored channels The Automatic station presetting stores the stations in a specific order. However, this order can be changed if you wish. Press to select “Ch Allocation”, then press ENTER/CH LIST Select the desired option, then press ENTER/ CH LIST Note:...

  • Page 16: Manual Tv Station Presetting

    Manual TV station presetting If you like, you may manually tune a certain station into a selected programme position, without deleting or modifying program position’s contents. The presetting applies to both analog and digital TV. Press the ATV/DTV button to enter ATV or DTV mode then follow the steps to set the TV stations manually.

  • Page 17: Basic Operation

    Basic operation Channel selection Use the 0-9 numbered buttons. Example: • No. 2: Press 0 and within 2 seconds, press 2. • No. 29: Press 2 and within 2 seconds, press 9. (1) Press CH to select a channel. This takes approx. 2 seconds. If the auto search only stored 5 stations, only these 5 will appear.
  • Page 18 Basic operation (continued) Information display In ATV mode: Press to display the Channel number and sleep timer settings information on the screen. Current settings for the sound mode, picture size and resolution (if in use) are also displayed. The information will appear for approx. 5 seconds. In DTV mode: When you switch channels, a channel banner is displayed for a few seconds.

  • Page 19: Teletext

    Teletext Teletext is sent page by page. This unit is able to automatically store up to 256 pages, but they can only be accessed once they have been stored. This can take a few moments. Fastext/TOPtext Hold Pages The Fastext/TOPtext is teletext with a special directory. Some pages are divided up into subpages by the channel.

  • Page 20: Stereo Reception With The Built-In Analog Tuner

    Stereo reception with the built-in analog tuner The built-in Tuner can detect NICAM stereo sound reception: and receive NICAM stereo broadcasts automatically. Press MENU SETUP to display the Main Menu screen. Press to select “Sound“, then press ENTER/CH LIST Select “NICAM”, then press to select “Auto”...

  • Page 21: Picture Format

    Picture format The broadcaster may transmit a Wide Screen Signalling (WSS) signal which can determine the correct picture width and set it automatically when the ‘Auto’ setting is used. If you want to change this setting, you can select from the formats listed below. Auto picture size Press PIC SIZE repeatedly until ‘Auto’...

  • Page 22: Other Convenience Functions

    NICAM Auto/Off See page 20. Bass/Treble/Balance You can adjust the sound quality to your preference. HDMI Audio (19DV615Y/22DV615Y)/ You can choose the appropriate HDMI audio input setting for the digital audio or HDMI1 Audio (26DV615Y) video device. Reset Select “Reset” to reset Sound settings to the factory preset values.
  • Page 23 Other convenience functions (continued) Main Selected items Setup hint menu Setup Language See page 13. View the current time settings. See page 24. Timer Setting* Set password for TV programmes and movies. Password Setup* Version View the hardware and software version information. Vertical Position When the Cinema mode is selected (see page 21), you can adjust the vertical pic- ture position.

  • Page 24: Display Setup/Timer Setting (Dtv Mode Only)

    Display setup/Timer setting (DTV mode only) Display Setup Press DIGITAL MENU to display the Main Menu screen. Press to select “Setup” menu, then press ENTER/CH LIST Press to select “Display Setup”, then press ENTER/CH LIST The Display Setup menu appears. Press to select an item, then press to change each setting.

  • Page 25: Password Setup (Parental Lock) (Dtv Mode Only)

    Password setup (Parental lock) (DTV mode only) Password Setup (Parental lock) This feature allows you to have a parental control of the service viewing as per your preference. Once a service is protected with a password, it cannot be viewed unless the correct password is provided.

  • Page 26: Version

    Version Version You can check the software version information. Press DIGITAL MENU or MENU SETUP to display the Main Menu screen. Press to select the “Setup” menu, then press ENTER/CH LIST Press to select “Version”, then press ENTER/CH LIST Note: •...

  • Page 27: Multi Audio/Dvb-Subtitle (Dtv Mode Only)

    Multi audio/DVB-Subtitle (DTV mode only) Multi audio You can select your preferred Audio mode and DVB (digital TV) subtitle language. The Multi audio menu will display the Audio mode and Language options available with the current broadcast. Press AUDIO SELECT to display the Multi audio menu.

  • Page 28: Epg (Electronic Program Guide) (Dtv Mode Only)

    EPG (Electronic Program Guide) (DTV mode only) The Guide menu shows the Press GUIDE to display the EPG menu. available programme listings for the next 8 days only, including today. However, the guide menu will show ‘No Event Name’ for programmes which are more than 8 days ahead, or for programmes within the 8...

  • Page 29: Epg Timer (Dtv Mode Only)

    EPG Timer (DTV mode only) If you try to switch to another channel while a timer event is in progress, the following message will appear: ‘Warning: Changing the channel will interrupt your event timer. Are you sure you want to proceed? Yes/No”. Select “Yes” or “No” according to your wishes.

  • Page 30: Disc

    Disc DVD discs must be Region 4 or Region ALL type to play on this unit. The suitable disc formats are: DVD-Video, DVD-R/-RW (Video format only), Audio CD, CD-R/CD-RW and Video CD. Some CD-R/RW discs may be incompatible. • This unit can play an 8cm disc. Please do not use a disc adapter. It may cause trouble. •...

  • Page 31: Playing A Disc

    Playing a disc This section shows you the basics on how to play a disc Basic playback (DVD/VCD/Audio CD) Preparation: Press on the unit or on the remote control. Press TV/DVD on the remote control to select the DVD mode. The DVD startup screen appears on-screen.
  • Page 32 Playing a disc (continued) To start playback in stop mode Press PLAY To pause playback (still mode) Press PAUSE during playback. To continue playback from still mode Press PLAY To stop playback Press STOP To remove the disc Press EJECT Wait for the disc drive to eject the disc, then remove the disc from the slot.
  • Page 33 Playing a disc (continued) You can play discs at various speeds. Playing in fast reverse or fast forward direction (DVD/VCD/Audio CD) Press REV during playback. / FF • REV : Fast reverse playback • FF : Fast forward playback Each time you press REV , the playback speed changes.

  • Page 34: Zooming/Locating Desired Scene

    Zooming/Locating desired scene Zooming (DVD/VCD) This unit will allow you to zoom in the frame image. You can then make selections by switching the position of the frame. Press CH RTN ZOOM during playback. The view will zoom into the center of the image. Each press of the button will increase the scale value: 1(x 1.3), 2 (x 1.5) and...

  • Page 35: Marking Desired Scenes

    Marking desired scenes Marking the scenes (DVD/VCD/Audio CD) Scene bookmarks refers to specific points in the playback range that has been marked for later access. You can create up to three markers per disc. Press MARKER at the scene where you would like to place the bookmark.

  • Page 36: Repeat Playback/A-B Repeat Playback

    Repeat playback/A-B Repeat playback Repeat playback (DVD/VCD) Press PLAY MODE during playback or stop mode. Press ENTER/CH LIST repeatedly to select [Video CD] “Chapter” or “Title”. Play Mode Mode : Normal Repeat : Off Press to select “Repeat”, then press [DVD] repeatedly to select a repeat ENTER/CH LIST...

  • Page 37: Changing Angles/Title Selection/Dvd Menu

    Changing angles/Title selection/DVD menu Changing angles (DVD) When playing back a disc recorded with multi-angle scenes, you can select the scene angle that you prefer. Press ANGLE during playback. The current angle will appear. Press ANGLE repeatedly until the desired angle is displayed. Note: •...

  • Page 38: Changing Soundtrack Language/Subtitles/Disc Status

    Changing soundtrack language/Subtitles/Disc status Changing soundtrack language (DVD/VCD) You can select the soundtrack language when you play a multilingual disc. Press AUDIO SELECT during playback. The current soundtrack language will appear. Press AUDIO SELECT repeatedly until the desired D 5.1 Ch Eng language is selected.

  • Page 39: Mp3/Jpeg/Divx® And Audio Cd Operation

    ® MP3/JPEG/DivX and Audio CD operation ® This unit can playback the MP3/JPEG/DivX -data which has been recorded on CD-R/RW. Audio CD also can be played back. ® ® To produce the MP3/JPEG/DivX -data, you need a Windows-PC with CD-RW drive and a MP3/JPEG/DivX -encoding Software (not supplied).
  • Page 40 ® MP3/JPEG/DivX and Audio CD operation (continued) Loading CD ® Load a MP3/JPEG/DivX CD or an Audio CD into the disc slot. A file browser screen will appear on the screen. • If the current directory has more than 8 files, press to scroll the file list.
  • Page 41 ® MP3/JPEG/DivX and Audio CD operation (continued) JPEG playback In the file browser screen, press to select an image file for viewing. /Picture-01.JPG A preview of the selected file displayed in the Preview panel. Select files Picture-01 Repeat :Off Picture-02 Picture-03 To display a thumbnail list, press DVD MENU Mode...
  • Page 42 ® MP3/JPEG/DivX and Audio CD operation (continued) ® DivX playback In the file browser screen, press to select the desired file. /Movie-01.DIVX When PLAY is pressed without selecting the file, Select files Movie-01 playback automatically begins starting from the first file in Repeat :Off Movie-02...
  • Page 43 ® MP3/JPEG/DivX and Audio CD operation (continued) ® Repeat playback (Audio CD/MP3/JPEG/DivX In the file browser screen, press to move the selection highlight to the Option panel. Press to select “Repeat”. Select files Folder-1 Repeat :Off Folder-2 MP3-1 Mode :Normal Press ENTER/CH LIST repeatedly to select a repeat mode, “Track”...
  • Page 44 ® MP3/JPEG/DivX and Audio CD operation (continued) ® Programme playback (Audio CD/MP3/JPEG/DivX In the file browser screen, press to move the selection highlight to the Option panel. Press to select “Edit Mode”, then press ENTER/CH LIST to enable it. Folder-1 Repeat :Off Folder-2...

  • Page 45: Program Playback/Random Playback

    Program playback/Random playback You can arrange the Program playback (VCD) playback order of tracks or Press PLAY MODE during stop mode. files on the disc. And the unit Play Mode can also select tracks or files Mode :Normal at random and playback –...

  • Page 46: Customizing The Function Settings

    Customizing the function settings You can change the default Setting procedure settings to customize performance to your In DVD mode, press MENU SETUP in stop mode. preference. Menu Parental E.B.L. : Off : Off : Off :English Subtitle QSound TV Screen Set Password : On : 4:3...
  • Page 47 Customizing the function settings (continued) Settings details Section Option Details Page Menu Select the language for the DVD menu display. Subtitle Select the subtitle language for disc playback. DivX subtitle Select the subtitle language for DivX VOD playback. Audio Select the audio language for disc playback. Select a preferred language for on screen display.
  • Page 48 Customizing the function settings (continued) Menu and OSD Select the language for the DVD and Setup menu display. Options include: English, French, Spanish, and Italian Subtitle and Audio Select the language for the subtitle display and audio track output during disc playback.
  • Page 49 Customizing the function settings (continued) JPEG Interval You can continuously playback all JPEG files automatically. After the selection below, the disc will start playback on JPEG files which have been recorded. • Off: Plays back one file at a time. •...
  • Page 50 Customizing the function settings (continued) Parental Some discs are specified as not suitable for children. Such discs can be limited not to playback with the unit. (1) Press to select “Parental”, then press ENTER/CH LIST . “Enter Password” screen will appear. (2) Press “0000”...
  • Page 51 Customizing the function settings (continued) Password (1) Press to select “Password”, then press ENTER/CH LIST . The ‘Enter Current Password’ screen will appear. (2) Press Number buttons (0-9) to input the current password (If the password has not been set yet after you purchase this unit, it is “0000”), then press .

  • Page 52: Temporary Cancel The Rating Level By Dvd Disc

    Temporary cancel the rating level by DVD disc Depending on the DVD disc, Load a DVD disc. the disc may try to temporarily cancel the rating level that you have set. It is up to you to decide whether to cancel the rating level or not.

  • Page 53: Pc Connection

    PC connection As PCs are sometimes supplied with a ‘conventional’ CRT monitor, you may need to adjust the display settings of your PC’s graphics card, otherwise the pictures may not appear correctly. Switch on your PC (still with your original monitor) - select “1360 x 768”...

  • Page 54: Connecting Tv To Other Equipment

    Connecting TV to other equipment Connecting aerials and other devices to your TV Connect the cable TV coaxial cable directly to the aerial input jack on the rear of the TV. TV (Back side view) Tuner Antenna AV (Video, Component input Audio L/R) Component cable Satellite...
  • Page 55 Connecting TV to other equipment (continued) Connecting a DVD player TV (Back side view) Connect the DVD player as shown. Select AV as the input mode. DVD player Audio/video cable (not supplied) Connecting a Video camera and a Video recorder Select the AV input mode (see page 13).

  • Page 56: Status Message

    Status message Information/Status message Cause Invalid entry The channel does not exist. (e.g., “000“) No radio services Cannot change to Radio mode because there is no radio service in the channel list. No TV service Cannot change to TV mode because there is no TV service in the channel list. No data service Cannot change to data mode because there is no data service in the channel list.

  • Page 57: Troubleshooting Table

    Troubleshooting table Please check the following list before requesting service. Symptom Possible solution Page Switch on the set. No picture, no sound Check that the mains power outlet is properly connected. Select appropriate input mode. Unplug unit for 1 minute, then plug it back in. No reception Have you tuned in the TV stations? 10, 13...

  • Page 58: Specifications

    Specifications Model 19DV615Y 22DV615Y 26DV615Y Television LCD panel (approximate 18.5 inch 21.6 inch 26.0 inch screen size, diagonal) System Analog PAL, B/G Digital DVB-T (OFDM 2k/8k 16QAM/64QAM) Video colour system PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60 Preset channels: Analog channels (99) + Digital channels...

  • Page 59: The Gnu General Public License (Gpl)

    The GNU General Public License (GPL) Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it.
  • Page 60 In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. (3) You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: Accompany it with the complete corresponding machine-readable source code, which must be distributed under the...
  • Page 61 NO WARRANTY (1) BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

  • Page 62: Limited Warranty Statement

    (4) This Warranty is personal to the person or organisation named on the original sales receipt (proof of purchase), and is not transferable to a subsequent owner. (5) You are required to deliver and pickup your LCD TV/DVD Combo to and from a Toshiba AV authorised service centre at your expense. See "To Obtain Warranty Service" section for more detail.
  • Page 63 Toshiba if the Reseller determines the problem is related to warranty. (3) If your Reseller is unable to assist you, call the Toshiba Service Centre within the Warranty period and no later than 30 days after the discovery of the claimed defect (whichever is the earlier).
  • Page 64 (5) Toshiba maintains a record of warranty entitlement for all LCD TV/ DVD Combos shipped and this will be used to validate your end warranty date. If you disagree with Toshiba's identification of warranty entitlement, you must provide proof of purchase before any warranty service can be performed.
  • Page 65 ColorStream and TheaterWide are registered trademarks of Toshiba America Consumer Products, L.L.C. Printed in China...

This manual is also suitable for:

22dv615y26dv615y

Table of Contents