Installation Instructions; Choosing The Location; Recessed Fitting - Fisher & Paykel OS60NDTX Series Installation Instructions And User Manual

Steam oven

Hide thumbs

Table Of Contents

Table of Contents

Two installation options:

Option 'A' - oven only (overall height 457 mm)

Option 'B' - oven + lower trim kit accessory

(overall height 478 mm)

Note: If you are installing an appliance directly

over another, you have the option of using the

supplied black metal shelf cover to conceal the

shelf front that would be visible between the two

appliances. This needs to be fitted before

the lower trim kit and/or appliance is installed.

Refer to the instructions packed with the shelf

cover accessory kit.

450

(option 'A')

550 min.

470

(option 'B')

Choosing the location

The diagrams above determine the dimensions of a unit where you will be able to install your

oven. This appliance can be installed as an under the counter or column oven.

Recessed fitting

Centre the oven in the unit to guarantee a minimum distance of 20mm with the adjacent unit.

The recessed unit must be made of heat-resistant material (or coated with this type of material).

For increased stability, fasten the oven to the unit with 2 screws through the holes provided for

this purpose on the lateral uprights.

1) Make a Ø 2 mm hole in the wall of the unit to avoid the wood splitting.

2) Fasten the oven with the 2 screws.

Note: To ensure that your installation is compliant, do not hesitate to contact a household

appliance specialist.

Important!

We accept no liability in the event of an accident or incident resulting from grounding that is non-

existent, faulty or incorrectly fitted.

If the electrical installation in your household requires modification for you to connect your

appliance, contact a qualified electrician.

If the oven presents any anomaly, disconnect the oven from the power supply or remove the fuse

from the oven connection line.