Changing The Bulb - Fisher & Paykel OS60NDTX Series Installation Instructions And User Manual

Steam oven
Table of Contents

Advertisement

Important!
SAFETY: Make sure that the appliance is disconnected from the power supply before replacing the
bulb to avoid any risk of electric shock.
Act when the appliance has cooled down.
To unscrew the viewing panel and the bulb, use a rubber glove, which will make it easier to
remove.

Changing the bulb

The bulb is located inside the oven on
the back wall.
Disconnect your oven from the mains
before any intervention on the bulb to
avoid any electric shock.
Turn the lamp cover a quarter turn to the
left.
Unscrew the bulb in the same direction.
Bulb characteristics:
15 W - 0-240 V
300°C - Base E 14
Change the bulb and then fit the lamp cover back into position, making sure that the seals are
correctly placed.
Reconnect your oven.
Care and cleaning
23
Bulb
Lamp cover

Advertisement

Table of Contents
loading

Table of Contents