Prepare The Display - Panasonic TY-ST42PT3S Installation Manual

Prepare the display.

1 1
Install the insulating spacers in the display unit.
Lay the display with the screen facing down on a clean blanket or sheet and
follow the steps below.
1) Remove the four bolts from the display.
2) In each of the four bolt holes, insert a pan head bolt with hex socket
(M8-45), toothed pan washer and insulating spacer (four each, all
included). Insert as shown in the diagram on the left.
Quite los cuatro pernos.
6-
6
Pan head bolt with
hex socket
Toothed pan washer
Insulating spacer