Panasonic TY-ST42PT3S Installation Manual page 12

Instruction of the installation
Assembling the pedestal
1
Put the poles into the outer holes on the base, and fasten the four
screws.
Attaching the pedestal to the display unit
1
Spread a clean cloth over a level floor or base, and place on it the display
unit face down.
Remove the screws and covers.
Keep them in a safe place for possible future use.
1-
2
Ensure that the poles sit
flush with the bottom of
the base.
Assembly screw
(M5-20) x 4
Place the display face
down on a cloth clean
and free from other
foregin par ticles, and
then proceed to the next
step.