Attaching The Display Unit To The Wall-Hanging Bracket - Panasonic TY-ST42PT3S Installation Manual

Attaching the display unit to the wall-
hanging bracket
1
Lift the display unit so that the upper insulating spacers at the back
may fit into the notched indentation at the top of the wall-hanging
bracket, and then lower the display unit into place.
2
1) Lift the display unit slightly and insert the lower insulating spacers
at the back of the display unit into the lower cutouts in the wall-
hanging bracket.
2) Lower the display unit into the lower notched part of the cutouts.
3
Insert and fasten the
4-
6
Insultating spacer
screws at both the left and right sides.
Holding bracket
Fixing screws(left and right)
Notches
Do not lift the display
too high or it may come
out of the notches in the
upper indentations.
To prevent the display unit
from becoming detached
from the wall-hanging
bracket, make sure that
both the left and right
fixing screws are properly
fitted.
Fixing screw(M5)