Fixing The Display Unit To The Stand - Panasonic TY-ST42PT3S Installation Manual

Fixing the display unit to the stand

1
1) Spread a clean cloth over a level floor or base, and place on it the
display unit face down.
2) Remove the screws and covers.
Keep them in a safe place for possible future use.
2
Insert the two poles at the top of the stand into the holes in the base of
the display unit as shown in the illustration below.
3
Insert the four
the display unit and fasten them into the holes in the inserted poles.
3-
4
screws, two on each side, into the holes in the back of
Lock the casters before
installing the display unit.
Press down the caster
switch to lock the caster.
Unlock
Lock
Assembly screw (M5-30)