Omron V640-HAM11-ETN User Manual page 63

A Amplifier Unit Information
Item
Model
Firmware Version
MAC Address
DIP-SW
B Network Setting Information
Item
Network Settings(DIP)
IP Address
Subnet Mask
Network Settings(ROM)
IP Address
Subnet Mask
C Last Command Information
Item
Latest Communication
Command Code
Response Code
D Communications History Information
Item
Communication History
Total
Success
Error
E Hardware Information
Item
H/W Status
Memory
Antenna
Description
The product model number is displayed.
The firmware version is displayed.
The MAC address is displayed.
"Enabled" is displayed if the Amplifier Unit is set to use the IP address
that is set on the DIP switch. "Disabled" is displayed if the Amplifier
Unit is set to use the IP address that is set in ROM.
Description
If the Amplifier Unit is set to use the IP address that is set on the DIP
switch, this item is displayed in blue, and the IP address and subnet
mask of the Amplifier Unit are displayed.
If the Amplifier Unit is set to use the IP address that is set in ROM, this
item is displayed in blue, and the IP address and subnet mask of the
Amplifier Unit are displayed.
Description
The last command code that was executed and the last response code
that was returned by the Amplifier Unit are displayed.
Description
History information on communications with the ID Tags is displayed.
Total number of communications
Total number of successful communications
Total number of failed communications
Description
Hardware information is displayed.
"Error" is displayed if a memory error was detected during the memory
check at startup.
"Error" is displayed if an error is detected in the CID Head that is con-
nected to the Amplifier Unit (or if a CID Head is not connected).
SECTION 5
Browser Interface
Comments
Comments
If the Amplifier Unit is set
to use the IP address that
is set on the DIP switch,
this item is grayed out.
If the Amplifier Unit is set
to use the IP address that
is set in ROM, this item is
grayed out.
Comments
Nothing is displayed if a
command has not been
executed since the
Amplifier Unit was
started.
Comments
Comments
"OK" is displayed for nor-
mal status.
CIDRW System
User's Manual
61