Omron V640-HAM11-ETN User Manual page 49

Response
The response code (00: normal) and MAC address are returned.
Response code
0 0 0 0
* The above response is for a MAC address of 00:1F:16:1A:B9:8E.
Example 4: Checking If Network Settings on DIP Switch on Amplifier Unit Are Enabled or Disabled
Command
Parameter
Command code
type
1 4 1 0
Response
The response code (00: normal) and enabled/disabled status of the DIP switch network settings are
returned.
Response DIP switch
code enabled/disabled
0 0 0 1
* The above response is for when the DIP switch settings are enabled. The response will show 00 for disabled status.
Example 5: Checking IP Address on DIP Switch on Amplifier Unit
Command
Parameter
Command code
type
1 4 1 1
Response
The response code (00: normal) and IP address on the DIP switch (decimal, four octets of 3 digits
each) are returned.
Response code
0 0 1 9
First octet
* The above response is for when the IP address on the DIP switch is 192.168.1.20.
* The following response will be returned if the DIP switch network settings are disabled.
Response code
0 0 0 0
First octet
MAC address
1 F 1 6 1
CR
0Dh
CR
0Dh
CR
0Dh
IP address on DIP switch
2 1 6 8 0
Second octet Third octet
IP address on DIP switch
0 0 0 0 0
Second octet Third octet
Reading from/Writing to ID Tags
A B 9 8 E
0 1 0 2 0
Fourth octet
0 0 0 0 0
Fourth octet
SECTION 4
CR
0Dh
CR
0Dh
CR
0Dh
CIDRW System
47
User's Manual