Stp/Rstp Commands; [No] Spanning-Tree; Spanning-Tree Forward-Delay; Spanning-Tree Hello-Time - Planet FGSW-2620VM User Manual

6.12 STP/RSTP Commands

[no] spanning-tree

Description:
Enable or disable spanning-tree.

spanning-tree forward-delay

Description:
Set spanning tree forward delay used, in seconds.
Syntax:
spanning-tree forward-delay <4-30>
Parameters:
<4-30> specifies the forward delay, in seconds. Default value is 15.
The parameters must enforce the following relationships:
2*(hello-time + 1) <= maximum-age <= 2*(forward-delay - 1)

spanning-tree hello-time

Description:
Set spanning tree hello time, in seconds.
Syntax:
spanning-tree hello-time <1-10>
Parameters:
<1-10> specifies the hello time, in seconds. Default value is 2.
The parameters must enforce the following relationships:
2*(hello-time + 1) <= maximum-age <= 2*(forward-delay - 1)

spanning-tree maximum-age

Description:
Set spanning tree maximum age, in seconds.
Syntax:
spanning-tree maximum-age <6-40>
Parameters:
<6-40> specifies the maximum age, in seconds. Default value is 20.
User's Manual of FGSW-Series
161