Planet FGSW-2620VM User Manual page 94

The page includes the following fields:
Object
Group Key:
Port Member:
LACP enabled
Having set up the aggregator setting with LACP enabled, you will see the trunking group information between two switches
on the tab of Aggregator Information.
Switch 1 configuration
1. Set System Priority of the trunk group. The default is 1.
2. Select a trunk group ID by pull down the drop-down menu bar.
3. Enable LACP.
4. Include the member ports by clicking the Add button after selecting the port number and the column field of
Work Ports changes automatically.
Figure 4-6-3: Static Trunking Group information
Description
This is a read-only column field that displays the trunk group ID.
This is a read-only column field that displays the members of this static trunk
group.
94
User's Manual of FGSW-Series