Rstp System Configuration - Planet FGSW-2620VM User Manual

4.5.4 RSTP System Configuration

This section provides RSTP-System Configuration from the Switch, the screen in
The user can view spanning tree information of Root Bridge.
The user can modify RSTP state. After modification, click
The page includes the following fields:
Object
RSTP mode:
Protocol Version
Priority (0-61440):
Max Age (6-40):
Hello Time (1-10):
Figure 4-5-4: RSTP System Configuration interface
Description
The user must enable the RSTP function first before configuring the related
parameters.
A value used to specify the spanning tree protocol, the original spanning tree
protocol (STP, 802.1d) or the rapid spanning tree protocol (RSTP, 802.1w).
The switch with the lowest value has the highest priority and is selected as the
root. If the value is changed, the user must reboot the switch.
The value must be a multiple of 4096 according to the protocol standard rule.
The number of seconds a switch waits without receiving Spanning-tree Protocol
configuration messages before attempting a reconfiguration.
Enter a value between 6 through 40.
The time that controls the switch to send out the BPDU packet to check RSTP
current status.
Enter a value between 1 through 10.
User's Manual of FGSW-Series
Figure 4-5-4
Apply
.
87
appears.