Power Over Ethernet (Fgsw-2620Pvm / Fgsw-2620Vmp4 / Fgsw-2612Pvm); Power Over Ethernet Powered Device - Planet FGSW-2620VM User Manual

4.13 Power Over Ethernet
Providing up to 24/12 PoE, in-line power interface, the FGSW-2620PVM / FGSW-2620VMP4 / FGSW-2612PVM PoE
Switch can easily build a power central-controlled IP phone system, IP Camera system, AP group for the enterprise. For
instance, 24/12 camera / AP can be easily installed around the corner in the company for surveillance demands or build a
wireless roaming environment in the office. Without the power-socket limitation, the PoE Switch makes the installation of
cameras or WLAN AP more easily and efficiently.

4.13.1 Power over Ethernet Powered Device

3~5 watts
6~12 watts
10~12 watts
3~12 watts
(FGSW-2620PVM / FGSW-2620VMP4 / FGSW-2612PVM)
Voice over IP phones
Enterprise can install POE VoIP Phone, ATA and other
Ethernet/non-Ethernet end-devices to the central where UPS is installed
for un-interrupt power system and power control system.
Wireless LAN Access Points
Museum, Sightseeing, Airport, Hotel, Campus, Factory, Warehouse
can install the Access Point any where with no hesitation
IP Surveillance
Enterprise, Museum, Campus, Hospital, Bank, can install IP Camera
without limits of install location – no need electrician to install AC
sockets.
PoE Splitter
PoE Splitter split the PoE 48V DC over the Ethernet cable into 5/12V DC
power output. It frees the device deployment from restrictions due to
power outlet locations, which eliminate the costs for additional AC wiring
and reduces the installation time.
127
User's Manual of FGSW-Series